• Skid-resistant panel

  • NF Exterior CTB - X Structure

  • Format : 2500 x 1250 mm


Rolpin CARGO is a 100% RESINOUS multi-ply plywood, with an anti-skid laminated surface.
Used for layout, furniture and carpentry, Rolpin BATI finds application where aesthetics and wood grain are important.

Product Features

Face Face revêtue d’un film phénolique brun noir (240 g/m²), structurée antidérapante à haute résistance à l’abrasion.
Back Face revêtue d’un film phénolique brun noir (240 g/m²), lisse.
2500 x 1250 mm (please contact us for other formats)

From 10 to 35 mm

Number of plies
From 5 to 13

From 60 to 17

560 à 610 kg/m3

Floors, platforms industrial bodywork, building and industry.


According to EN 314-2 standard: bonding class 3 “exterior applications» water and weather resistant. Phenolic glue.


Cutting, machining available upon request.

Structural use in construction

System 2 + Certificate of conformity according to EN 13986 + A1

Exterior conditions

According to EN 636 + A1 (structural use).French NF exterior CTBX quality mark and the German BFU 100 DIN 68705 part 3 certified.

Formaldehyde emission

E1 classification according to EN 717.2 standards.

Formaldehyde emission measurements reveal a clearance of 0.02 mg/L air using desiccator method ISO 12460-4. This value is 15 times lower than the Japanese F**** standard requirements, the most stringent in the world (0.3 mg/l) according to JIS A 1460 standard.

Fire reaction classification

According to EN 13501-1 +A1
Thickness > 9 mm : Euroclass D-s2, d0


Marking CE
n° 380 – CPD – 011 - EN 13986 + A1



Panels should be stored in a covered and dry place and to be kept flat and level on dry rafters keeping them off the ground. Spacing between rafters is to be calculated to be suitable to the thickness and the nature of the stored panels. In case of storage in several piles, align the supports with the long side. On a construction site, plan for shelter or for covering for the panels that is simultaneously water repellent and permeable to water vapor.


Use in compliance with current industry, safety, and building codes.

Dimensional panel tolerances

They are in compliance with standard EN 315 requirements :

  • Length/width dimensional tolerance: ±3.5 mm
  • Straightness of edges and squaring: 1 mm per linear metre

Other features

Thermal conductivity
Environmental sustainability

Pentachlorophenol levels
Water vapour permeability
Sound absorption

Resistant to abrasion (number of Taber revolutions)
Cladding adhesion NF EN 54 162

λ = 0,13W/.K
Maritime pine species:
Class 3 - 4 according to EN 350 part 2
< 5 ppm. (PCP)
70 μ wet / 200 μ dry
250 à 500 Hz = 0,10
1000 à 2000 Hz = 0,30

For more information and mechanical features, download the technical specifications sheet below.. 


 layout, furniture and carpentry, Rolpin BATI finds application where aesthetics and wood grain are important.


Other products

NF FORM-WORK CTB-C Resistant to moisture (CTB-X support) Format : 2500 x 1250...


Made of Falcata wood Japanese quality Eco-aware   The J-Light Board is light, easy to...


                Décliné en...


Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...