• Resistant to moisture (CTB-X support)

  • Format : 2500 x 1250 mm


Rolpin FILMÉ is a 100% RESINOUS multi-ply plywood, with top-of-the-range lamination (400g/m2).
Used for concrete formwork.



Product Features

Face Face revêtue d’un film phénolique brun noir (400 g/m²), lisse
Back Face revêtue d’un film phénolique brun noir (400 g/m²), lisse
2500 x 1250 mm (please contact us for other formats)

From 15 to 30 mm

Number of plies
From 7 to 11

From 40 to 30

610 to 630 kg/m3

Concrete formwork


According to EN 314-2 standard: bonding class 3 “exterior applications» water and weather resistant. Phenolic glue.


Cutting available upon request.

Structural use in construction

System 2 + Certificate of conformity according to EN 13986 + A1

Exterior conditions

According to NFB 54162 standard with gluing NFB 314-2 standard part 3

Formaldehyde emission

E1 classification according to EN 717.2 standards.

Formaldehyde emission measurements reveal a clearance of 0.02 mg/L air using desiccator method ISO 12460-4. This value is 15 times lower than the Japanese F**** standard requirements, the most stringent in the world (0.3 mg/l) according to JIS A 1460 standard.

Fire reaction classification

According to EN 13501-1 + A1
Thickness > 9 mm : Euroclass D-s2, d0


Marking CE
n° 380 – CPD – 011 - EN 13986 + A1



Panels should be stored in a covered and dry place and to be kept flat and level on dry rafters keeping them off the ground. Spacing between rafters is to be calculated to be suitable to the thickness and the nature of the stored panels.
In case of storage in several piles, align the supports with the long side. On a construction site, plan for shelter or for covering for the panels that is simultaneously water repellent and permeable to water vapor. In the event of storage over 6 months, be sure to again treat the edges with water resistant paint with paint.

for use

Release agent
Panel pretreatment with releasing oil prior to first use. Then apply another coat prior to each use Comply with the manufacturer requirements.

Immediately after use, the panels are to be cleaned using a couchgrass brush, dried and stored. Damaged portions can be repaired using epoxy putty.


To comply with current industry, safety, and building codes.

Dimensional Panel tolerances

They are in compliance with standard EN 315 requirements :

  • Length/width dimensional tolerance: ±3.5 mm
  • Squareness tolerance: 1 mm per linear metre

Other features

Thermal conductivity
Environmental sustainability

Pentachlorophenol levels
Water vapour permeability
Sound absorption

Resistant to abrasion
Cladding adhesion

λ = 0,13W/.K
Maritime pine species:
Class 3 - 4 according to EN 350 part 2
< 5 ppm. (PCP)
70 μ wet / 200 μ dry
250 à 500 Hz = 0,10
1000 à 2000 Hz = 0,30

For more information and mechanical features, download the technical specifications sheet below.. 


 layout, furniture and carpentry, Rolpin BATI finds application where aesthetics and wood grain are important.

Other products

                Décliné en...


Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...


NF Exterieur CTB-X Class 4 or class 3 Sanded faces   Rolpin TRHT, TA and...


Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...