ROLPIN UTI

  • Very resistants panels

  • NF Exterior CTB - X Structure

  • Format : 2500 x 1250 mm

 

Rolpin UTI is a MARITIME PINE plywood (origin France).
Used for packing, boxing, lost formwork, bracing, non visible structures and work-site protection.

 

Product Features

Face Face non réparée, admettant trous de noeuds et fentes
Back Face non réparée, admettant trous de noeuds et fentes
Finish Les 2 faces sont non poncées
       UTI III/III


One side sealed sanded

Dimensions
2500 x 1250 mm (please contact us for other formats)

Thickness
From 7 to 38 mm

Number of plies
From 3 to 13

Packaging
From 85 to 15

Density
560 à 610 kg/m3

Uses   Packing, boxing, lost formwork, bracing, non-visible structures and work-site protection.
Bond


According to EN 314-2 standard: bonding class 3 “exterior applications» water and weather resistant. Phenolic glue.

Options


Cutting, machining available upon request.

Structural use in construction

System 2 + Certificate of conformity according to EN 13986 + A1

Exterior conditions


According to EN 636 + A1 (structural use).French NF exterior CTBX quality mark and the German BFU 100 DIN 68705 part 3 certified.

Formaldehyde emission


E1 classification according to EN 717.2 standards.

Formaldehyde emission measurements reveal a clearance of 0.02 mg/L air using desiccator method ISO 12460-4. This value is 15 times lower than the Japanese F**** standard requirements, the most stringent in the world (0.3 mg/l) according to JIS A 1460 standard.

Fire reaction classification


According to EN 13501-1 +A1
Thickness > 9 mm : Euroclass D-s2, d0

 

Marking CE
n° 380 – CPD – 011 - EN 13986 + A1

ctbx
pefc
a+
fabriquéfrance
fnpa
ce

Storage


Panels should be stored in a covered and dry place and to be kept flat and level on dry rafters keeping them off the ground. Spacing between rafters is to be calculated to be suitable to the thickness and the nature of the stored panels. In case of storage in several piles, align the supports with the long side. On a construction site, plan for shelter or for covering for the panels that is simultaneously water repellent and permeable to water vapor.

Implementation


To comply with current industry, safety, and building codes.

Panel dimensional tolerances are as follows


They are in compliance with standard EN 315 requirements :

  • Length/width dimensional tolerance: ±3.5 mm
  • Straightness of edges and squaring: 1 mm per linear metre
  • Thickness tolerance according to NF EN 315 standards

Other features


Thermal conductivity
Environmental sustainability


Pentachlorophenol levels
Water vapour permeability
Sound absorption


λ = 0,13W/.K
Maritime pine species:
Class 3 - 4 according to EN 350 part 2
< 5 ppm. (PCP)
70 μ wet / 200 μ dry
250 à 500 Hz = 0,10
1000 à 2000 Hz = 0,30

For more information and mechanical features, download the technical specifications sheet below.. 

 

 layout, furniture and carpentry, Rolpin BATI finds application where aesthetics and wood grain are important.

 

Other products

                Décliné en...

More...

Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...

More...

Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...

More...

Decorative panels NF Exterior CTB - X Structure Eco-aware Format : 2500 x 1250...

More...